Industrial Products
Premium Industrial Oil, Bitumen VG grades & Bitumen Emulsion — bulk supply for road construction, manufacturing & infrastructure projects across India.
Industrial Oil
High-performance oils for heavy machinery, industrial processes & manufacturing.
Available in Furnace Oil, Base Oil and Lubricating Oil grades — bulk supply pan India.
Furnace Oil is a heavy residual fuel oil used primarily in industrial furnaces, boilers and heating systems. Known for high calorific value and cost-effective energy generation.
| Parameter | Specification / Value |
|---|---|
| Grade | Furnace Oil (Heavy Fuel Oil) |
| Kinematic Viscosity @50°C | 125–180 cSt (typical) |
| Flash Point | Min. 66°C |
| Calorific Value | ~10,200 kcal/kg |
| Sulphur Content | Max. 3.5% (m/m) |
| Water Content | Max. 1.0% (v/v) |
| Pour Point | Max. 20°C |
| Density @15°C | 0.95–0.99 g/cm³ |
| Supply Form | Tanker / Drum |
| Minimum Order | On enquiry |
Base Oil is the primary raw material for manufacturing finished lubricants. Used in blending engine oils, gear oils, greases and industrial lubricants. Available in multiple viscosity grades.
| Parameter | Specification / Value |
|---|---|
| Group | Group I / Group II |
| Viscosity Grade | SN-150 / SN-500 / BS-150 |
| Kinematic Viscosity @40°C | 28–110 cSt (grade dependent) |
| Viscosity Index | Min. 90 (Group I) / Min. 100 (Group II) |
| Flash Point (COC) | Min. 200°C |
| Pour Point | Max. -6°C |
| Colour (ASTM) | Max. L 3.5 |
| Sulphur Content | Max. 0.03% (Group II) |
| Supply Form | Drum (200L) / Tanker |
| Minimum Order | On enquiry |
Industrial Lubricating Oil for heavy machinery, hydraulic systems, compressors and manufacturing equipment. Reduces friction, wear and heat — extending machine life and performance.
| Parameter | Specification / Value |
|---|---|
| Grade | ISO VG 32 / 46 / 68 / 100 / 150 |
| Kinematic Viscosity @40°C | 32–150 cSt (grade dependent) |
| Viscosity Index | Min. 95 |
| Flash Point (COC) | Min. 200°C |
| Pour Point | Max. -6°C |
| Rust Prevention | Pass (ASTM D665) |
| Oxidation Stability | Good (TOST 2000+ hrs) |
| Demulsibility | Pass (ASTM D1401) |
| Supply Form | Drum (210L) / IBC / Tanker |
| Minimum Order | On enquiry |
Bitumen VG Grades
IS 73:2013 compliant Viscosity Grade Bitumen for road construction, highways & waterproofing.
Available in VG-10, VG-30 and VG-40 — tanker & drum supply across India.
Bitumen VG-10 is the softest and most fluid viscosity-grade bitumen. Ideal for surface dressing, prime coat and use in cold climates where lower viscosity is needed for proper coating.
| Parameter | VG-10 Requirement |
|---|---|
| Standard | IS 73:2013 |
| Absolute Viscosity @60°C (Poise) | 800 – 1200 |
| Kinematic Viscosity @135°C (cSt) | Min. 250 |
| Flash Point (COC) °C | Min. 220 |
| Solubility in TCE % | Min. 99 |
| Penetration @25°C (0.1mm) | 80 – 100 (typical) |
| Softening Point °C | Min. 40 |
| Ductility @27°C (cm) | Min. 75 |
| Supply Form | Tanker / Drum (200kg) |
| GST Invoice | Included |
Bitumen VG-30 is the most widely used grade for road construction in India. Excellent binding, rutting resistance and durability — the standard choice for national and state highways.
| Parameter | VG-30 Requirement |
|---|---|
| Standard | IS 73:2013 |
| Absolute Viscosity @60°C (Poise) | 2400 – 3600 |
| Kinematic Viscosity @135°C (cSt) | Min. 350 |
| Flash Point (COC) °C | Min. 220 |
| Solubility in TCE % | Min. 99 |
| Penetration @25°C (0.1mm) | 45 – 60 (typical) |
| Softening Point °C | Min. 47 |
| Ductility @27°C (cm) | Min. 40 |
| Supply Form | Tanker / Drum (200kg) |
| GST Invoice | Included |
Bitumen VG-40 is the hardest grade, offering maximum rutting resistance for high-traffic roads, busy intersections and areas with extreme temperature conditions. Premium performance grade.
| Parameter | VG-40 Requirement |
|---|---|
| Standard | IS 73:2013 |
| Absolute Viscosity @60°C (Poise) | 3200 – 4800 |
| Kinematic Viscosity @135°C (cSt) | Min. 400 |
| Flash Point (COC) °C | Min. 220 |
| Solubility in TCE % | Min. 99 |
| Penetration @25°C (0.1mm) | 35 – 50 (typical) |
| Softening Point °C | Min. 50 |
| Ductility @27°C (cm) | Min. 25 |
| Supply Form | Tanker / Drum (200kg) |
| GST Invoice | Included |
Bitumen Emulsion
Cold-applied bitumen emulsion — no heating required. IS 8887 compliant grades for tack coat,
surface dressing, prime coat and chip sealing. RS, SS and CSS grades available.
RS-1 (Rapid Setting Grade 1) is a cationic bitumen emulsion that breaks quickly on contact with aggregate. Used for surface dressing and spray applications on dry roads.
| Parameter | RS-1 Specification |
|---|---|
| Standard | IS 8887 |
| Type | Cationic Rapid Setting |
| Residue on 600µ sieve % | Max. 0.05 |
| Viscosity (SFS) @25°C (sec) | 20 – 100 |
| Coagulation Test | No coagulation |
| Binder Content % | Min. 60 |
| Residue Penetration @25°C | 100 – 200 |
| Residue Ductility @27°C (cm) | Min. 50 |
| Application Temp. | Ambient (cold applied) |
| Supply Form | Drum (200L) / Tanker |
RS-2 is a higher-viscosity rapid-setting cationic emulsion. Breaks faster than RS-1 and provides stronger aggregate bonding. Ideal for surface dressing with coarser aggregates.
| Parameter | RS-2 Specification |
|---|---|
| Standard | IS 8887 |
| Type | Cationic Rapid Setting |
| Residue on 600µ sieve % | Max. 0.05 |
| Viscosity (SFS) @25°C (sec) | 100 – 300 |
| Coagulation Test | No coagulation |
| Binder Content % | Min. 65 |
| Residue Penetration @25°C | 100 – 200 |
| Residue Ductility @27°C (cm) | Min. 50 |
| Application Temp. | Ambient (cold applied) |
| Supply Form | Drum (200L) / Tanker |
SS-1 (Slow Setting Grade 1) breaks slowly, allowing time for mixing with aggregate or dilution. Used for prime coat, soil stabilization and slurry seal applications.
| Parameter | SS-1 Specification |
|---|---|
| Standard | IS 8887 |
| Type | Cationic Slow Setting |
| Residue on 600µ sieve % | Max. 0.1 |
| Viscosity (SFS) @25°C (sec) | 20 – 100 |
| Storage Stability 24hr % | Max. 1 |
| Binder Content % | Min. 57 |
| Residue Penetration @25°C | 100 – 250 |
| Residue Ductility @27°C (cm) | Min. 40 |
| Application Temp. | Ambient (cold applied) |
| Supply Form | Drum (200L) / Tanker |
CSS-1 (Cationic Slow Setting Grade 1) is designed for mixing with fine aggregates. Provides excellent adhesion and coating for slurry seals, microsurfacing and cold mix asphalt.
| Parameter | CSS-1 Specification |
|---|---|
| Standard | IS 8887 |
| Type | Cationic Slow Setting |
| Residue on 600µ sieve % | Max. 0.1 |
| Viscosity (SFS) @25°C (sec) | 20 – 100 |
| Storage Stability 24hr % | Max. 1 |
| Binder Content % | Min. 57 |
| Residue Penetration @25°C | 100 – 250 |
| Residue Ductility @27°C (cm) | Min. 40 |
| Charge | Positive (Cationic) |
| Supply Form | Drum (200L) / Tanker |
Compare All Products
Quick overview of all grades — Aadisanskar Enterprises · 27CSNPS5884F2ZW
| Product | Grade / Type | Standard | Primary Use | Setting | Supply Form |
|---|---|---|---|---|---|
| Furnace Oil | Heavy Fuel Oil | Industry Std. | Boilers, Furnaces, Power | — | Tanker / Drum |
| Base Oil | Group I / II (SN-150–500) | Industry Std. | Lubricant Blending | — | Drum / Tanker |
| Lubricating Oil | ISO VG 32–150 | ISO | Machinery, Hydraulic, Compressor | — | Drum / IBC / Tanker |
| Bitumen VG-10 | VG-10 | IS 73:2013 | Surface Dressing, Cold Climate | Flexible | Tanker / Drum |
| Bitumen VG-30 | VG-30 | IS 73:2013 | Highway, Road Paving | Standard | Tanker / Drum |
| Bitumen VG-40 | VG-40 | IS 73:2013 | Heavy Traffic, High Temp. | Stiff | Tanker / Drum |
| Emulsion RS-1 | Rapid Setting 1 | IS 8887 | Surface Dressing, Tack Coat | Rapid | Drum / Tanker |
| Emulsion RS-2 | Rapid Setting 2 | IS 8887 | Chip Seal, Coarse Aggregate | Rapid | Drum / Tanker |
| Emulsion SS-1 | Slow Setting 1 | IS 8887 | Prime Coat, Slurry Seal | Slow | Drum / Tanker |
| Emulsion CSS-1 | Cationic Slow Setting 1 | IS 8887 | Cold Mix, Microsurfacing | Slow | Drum / Tanker |